Two Hour Webinar (September 2017)

Webinar agenda

1. Welcome and introduction to structural design of stainless steel (Nancy Baddoo, SCI)
2. Experience designing stainless steel bridges in Europe and Canada (Juan Sobrino, Pedelta)
3. Experience in the design and evaluation of stainless steel bridges in Europe and Asia (Graham Gedge, Arup)
4. Overview of use of A1010 for bridges (Matt Hebdon, Virginia Tech)
5. Lessons learnt from the design of Harbor Drive Bridge, San Diego (Dan Fitzwilliam, TY Lin)
6. Material selection (Catherine Houska, TMR Consulting)
7. Welding (Jim Fritz, TMR Consulting)
8. Procurement issues (Catherine Houska, TMR Consulting)

Additional resources on the use of stainless steel in bridges and highway structures

Download Full Guilde

Explanatory Notes

Part 1: Dimensions and Property Tables

Part 2: Design of Flexural Fembers (F_Y = 30 KSI)

Part 3: Design of flexural members (F_Y = 65 KSI)

Part 4: Design of compression members (F_Y = 30 KSI)

Part 5: Design of compression members (F_Y = 65 KSI)